Planar LB2650W User Manual page 14

14 LB2650W User's Guide
Only)
Choose different color temperature
(9300K, 7500K, sRGB, USER).
Color
Temperature
Default is USER.
USER mode adjustable.
Adjust the contrast and brightness of each color of the
white balance.
RED
GREEN
Allows you to adjust the Red/Green/Blue color gain.
BLUE
GAIN
RED
GREEN
Allows you to adjust the Red/Green/Blue color offset.
BLUE
OFFSET
Adjust color depth, increasing this value makes pictures
more colorful, decreasing makes pictures less colorful.
SATURATION
Adjustable value from -100 to 100.
Factory setting: 0
DDC/CI allows you to control certain settings of the
monitor via computer.
DDC/CI
Default is ON.
When "Full" is not selected in the "Expansion Mode"
and the resolution is under the LCD panel's native
resolution, the picture does not display at full screen.
The borders/sides around the picture can be
SIDE COLOR
customized.
Adjust "Side Color" to customize the color of the
border/sides around the picture.
Reset all user settings to factory preset value except
RECALL
language selection.
LANGUAGE Select a language for OSD menu.
OSD
Control the location of the OSD menu on the screen.
LEFT/RIGHT
Factory setting: Center of the screen.
OSD UP/DOWN
Select OSD Menu turn off time.
OSD TURN OFF
Factory setting: 45 seconds.
(020-0973-00 Rev. A)