Installation Guide; Before You Begin; What's In The Box; What's In The Is Manager's Kit - Planar C3215 Clean Screen II User Manual

Integrated computer with lcd color display
Table of Contents

Advertisement

INSTALLATION GUIDE

Before You Begin

Installing and setting up your Clean Screen II PC is very straightforward. But before you get
started, there are some things you should know.

What's in the box?

Each box will contain a Planar Clean Screen II head (that is, the integrated computer and LCD
display), three Torx drivers (sizes: T15, T20, T25), the external power supply, and the power
cord. Remove the equipment carefully and inspect for damage. Immediately notify the shipping
company if damage has occurred. Set aside the packing material for possible future use.

What's in the IS Manager's Kit ?

This manual and several 3.5" diskettes with all the display drivers necessary to install your Clean
Screen II PC to various Microsoft operating systems. (If you ordered your Clean Screen II PC
with a preloaded OS, then the drivers will already be installed on the hard disk.) The IS
Manager's Kit is sold separately from the Clean Screen II PC. If you need to purchase additional
kits, please call (503) 614-4100. Together, the Clean Screen II shipping box and the IS
Manager's Kit contain everything you need for installation and setup.

What's in this manual?

This manual is an advanced guide for installation and setup. It is intended for Information
Services Department professionals. We are not going to tell you things you already know about
PCs. We will cover what is unique about a Planar Clean Screen II and what you need to know to
successfully install and set them up. We encourage you to look through the entire manual before
you begin. Even if you don't need all the information right now, it is good to know where it is
for later reference.

What if I'm missing something?

If something is missing from the box, please contact us at (503) 614-4100 or (800) 893-8885.
There are, however, several other items you may need. In this manual we will assume you
already have the IS Manager's Kit, standard Planar mounting equipment for the Clean Screen II,
and a Planar 3.5" external floppy drive (for loading any necessary drivers). If you are missing
any of these, please check with your department. If necessary, you can contact us for more infor-
mation or to order these parts.
viii
Planar Clean Screen II PC User's Manual

Advertisement

Table of Contents
loading

Table of Contents