Implementation And Installation; Handling Precautions; Installation Environment - Mitsubishi AJ65BT-R2N-U-HW User Manual

3. IMPLEMENTATION AND INSTALLATION

3.1 Handling Precautions

POINT
For handling precautions on installation or removal of the module,
read
manual.
(1) Tighten the module installation screws within the following ranges.
Screw
Module installation screw (M4)
Terminal block terminal screw (M3.5)
Terminal block installation screw (M4)
RS-232 cable connector screw (M2.6)
(2) When using the DIN rail adapter, pay attention to the following.
(a) Applicable DIN rail type (Compliant with IEC 60715)
(b) DIN rail installation screw pitch

3.2 Installation Environment

(1) AJ65BT-R2N
For the AJ65BT-R2N installation environment, refer to the
following.
(2) CC-Link
For the installation environment for the CC-Link system, refer to the
following.
SAFETY PRECAUTIONS
Table 3.1 Screw tightening torque
Tightening toque range
• TH35-7.5Fe
• TH35-7.5Al
• TH35-15Fe
When installing a DIN rail, tighten the screws at a pitch of
200mm or less.
Section 2.1 General Specifications
User's Manual for the master module to be used
provided at the beginning of this
0.78 to 1.18N•m
0.59 to 0.88N•m
0.98 to 1.37N•m
0.20 to 0.39N•m
10
Remarks
-
-
-
Screw hole depth:
L=3.2mm or less
(Internal dimension from
end face)