Part Names And Settings - Mitsubishi AJ65BT-R2N-U-HW User Manual

4. PART NAMES AND SETTINGS

No. Name
1) Indicator LEDs
Station No. setting
2)
switches
Data link transmission
3)
speed setting switch
4) Mode setting switch
RS-232 transmission
5)
setting switches
6) Data link terminal block
7) RS-232 interface
General-purpose I/O
8)
terminal block
9) Reset switch
6)
Figure 4.1 AJ65BT-R2N outline view
Table 4.1 Part names
Indicate the operating status of the AJ65BT-R2N.
For details, refer to (1) in this section.
Set a station No. for the AJ65BT-R2N. (Factory default: 0)
Setting range: 1 to 64
Set the tens place of the station No. with " 10", and the ones
place with " 1".
Set the transmission speed of the AJ65BT-R2N.
For details, refer to (2) in this section.
Set the operation status of the AJ65BT-R2N.
For details, refer to (3) in this section.
Set the RS-232 transmission specifications.
For details, refer to (4) in this section.
Connect a CC-Link dedicated cable for power supply and
data link. (Detachable terminal block)
Connect an RS-232 cable for connection to an external
device.
Connect input/output wires. (Detachable terminal block)
Used to return to the power-up status.
1) 4) 3)
7)
Description
DA DG +24V
DB SLD (FG)
11
2)
9)
5)
8)
24G