Advertisement
w
Caution:
outlet.
Using Your Amplifier
Route Cables
Route a 75 ohm (RG-6 or RG-6QS) coaxial cable from the amplifier to
your input source (for example, a cable box or antenna) and to each
receiver (for example, a TV or DVR).
n
Note:
• Use only the length of cable necessary to connect the amplifier to
the input source and receiver.
• Do not route cables where they might be cut, crimped, or crushed
by normal activities.
• For the best appearance, route cable through the attic and walls,
and terminate each cable in a wall mount box with an F-connector
(not supplied).
Connect Devices
1. Connect a coaxial cable to your input source. To connect more
than one input source, use a high-isolation A/B or video selector
(not included) to switch between inputs.
2. Connect the coaxial cable from your input source to the amplifier's
INPUT terminal.
3. Connect one end of the coaxial cable to a receiver, and connect
the other end to an OUTPUT terminal on the amplifier.
4. Attach supplied terminators to the unused OUTPUT terminals.
5. Connect the supplied AC adapter to the jack on the right side of
the amplifier.
6. Plug the AC adapter into a standard AC outlet. The amplifier's red
LED lights when it has power.
To avoid injury, do not connect the adapter to a ceiling
4
Advertisement
