Page 1
1500472 User’s Guide 1-In 1-Out Bidirectional 3GHz Cable TV Amplifier Thank you for purchasing your 1-In 1-Out Bidirectional 3GHz cable TV Amplifier from RadioShack. Please read this user’s guide before setting up and using your new amplifier.
Using Your Amplifier Route Cables Note: Use only the length of cable necessary to connect the amplifier to the input source and receiver. Do not route cables where they might be cut, crimped, or crushed by normal activities. For the best appearance, route cable through the attic and walls, and terminate each cable in a wall mount box with an F-connector (not supplied).
Note: Do not use pliers to tighten the screw on F-connectors. Never connect both an outdoor antenna and the output from the amplifier to the antenna input of your TV or DVR without using a high-isolation A/B switch. Doing so could cause interference with other nearby receivers.