Samsung Officeserv 7100 Technical Manual page 22

OfficeServ 7100
TECHNICAL MANUAL
Figure 5. Connectivity between ITP Keyphones:
LAN
Remote ITP Keyphones
The ITP 5100 series key phones are unique in the fact that they function beyond the
confines of the existing LAN and will work normally on a WAN (Wide Area Network)
infrastructure and traverse routers and switches when connected remotely. The ITP
keyphone simply needs to know the MP10/MP10a server IP address and have the
matching ID and Password. The ITP Server is the address of the MP10/MP10a
OfficeServ 7100 system supporting that ITP keyphone. The ID and Password are used
to register the ITP keyphone to the OfficeServ 7100 and retain that number associated
with the registered ITP keyphone. The data infrastructure (IE routers and switched
hubs) allows connectivity via IP between the ITP keyphone and the MP10/MP10a. Note
that in Figure 6 that ITP 1 is on a different network than ITP 2.
relationships will be covered further on in this Special Application Guide.
Figure 6. Remote ITP Keyset (shown with iDCS keyphone connectivity also)
ITP 1
IP address:
105.1.16.144
On-board MGI or MGI-16 card
MGI
WAN
2.6.9
Home Page
SPECIAL APPLICATIONS
PART 2 JANUARY 2009
Public IP and Private IP
MGI
ITP 2
IP address:
105.52.10.200
Table of Contents
MP10/
See Figure 6.
MP10/