®
POWER FEED
25M & 25M ALUMINUM
Peak
Current
Too Low
Background
Current
Too Low
PEAK CURRENT
(Figure B.16)
Peak current controls the arc length, which also affects the
shape of the root. When using 100% CO
be higher than when welding with blended shielded gases. A
longer arc length is required with CO
FIGURE B.16
Peak
Current
Optimum
BACKGROUND CURRENT
Background current adjusts the overall heat input into the weld.
Changing the background current changes the shape of the back
bead. 100% CO
requires less background current than when
2
welding with blended shielding gases.
FIGURE B.17
Background
Current
Optimum
TAILOUT
Tailout provides additional heat into the weld without increasing
the arc length or the droplet size. Higher tailout values improve
wetting and may give faster travel speeds.
, the peak current will
2
to reduce spatter.
2
(Figure B.17)
B-18
OPERATION
Peak
Current
Too High
Background
Current
Too High