Appendix; Appendix 1 Function Upgrade For The D/A Conversion Module; Appendix 1.1 A Comparison Of Functions Of The D/A Conversion Module; Appendix 1.2 Combinations Of Functions Of The Function Version B D/A Conversion Module - Mitsubishi Q62DA User Manual

APPENDIX

APPENDIX

Appendix 1 Function upgrade for the D/A conversion module

The function version B D/A conversion module contains several functions not included
in the earlier product (function version A).
This section describes a comparison of functions of the D/A conversion module based
on the function additions, combinations with GX Configurator-DA software version and
precautions when replacing the module.

Appendix 1.1 A comparison of functions of the D/A conversion module

The functions added by function version B are listed below.
D/A conversion enable/disable function
D/A output enable/disable function
Synchronous output function
Multiple PLC system compatibility
Analog output test during PLC CPU STOP
Resolution mode
High resolution mode status flag (X8)

Appendix 1.2 Combinations of functions of the function version B D/A conversion module

and the GX Configurator-DA software version

The functions of the function version B D/A conversion module and the GX
Configurator-DA software version compatible with those functions are listed below.
Normal resolution mode
High resolution mode
High resolution mode
status flag (X8)
Multiple PLC system
compatibility
Analog output test during
PLC CPU STOP
App - 1
Function
Normal resolution mode
High resolution mode
Function
SW0D5C-QDAU-E
1
1 2
1
1
1 Functions added by function version B.
2 When the D/A conversion module is function version A and the GX Configurator-DA
software version is SW0D5C-QDAU-E 20C or later or GX Configurator-DA Version 1.10L or
later, OFF is always displayed.
: Functions added by function version B
Software version
SW0D5C-QDAU-E
00A 10B
: Compatible
MELSEC-Q
—
SW0D5C-QDAU-E
20C or later
GX Configurator-DA
Version 1.10L or later
: Not compatible
App - 1
App