Mitsubishi Q62DA User Manual page 14

2 SYSTEM CONFIGURATION
(4) Software packages supported
If installed in the Q02/Q02H/Q06H/
Q12H/Q25HCPU
If installed in the
Q00J/Q00/Q01CPU
If installed in a multiple PLC system
If installed in a MELSECNET/H
remote I/O station
2 - 2
Correspondence between systems which use D/A conversion modules and
software packages are as shown below.
The GX Developer is necessary when using a D/A conversion module.
4 It is not compatible with the high resolution mode in SW0D5C-QDAU-E 10B or earlier versions.
See Appendix 1.2 for details.
Software Version
GX Configurator-DA
GX Developer
SW0D5C-QDAU-E 00A
Version 4 or later
Version 1.10L or later
(cannot be used with the
Version 7 or later
60G or earlier versions).
SW0D5C-QDAU-E 20C
Version 6 or later
SW0D5C-QDAU-E 50F
Version 6 or later
MELSEC-Q
4
or later
SW0D5C-QDAU-E
or later
or later
2 - 2
2