Remote Control - Pioneer VSX-D498 Operating Instructions Manual

Names of Parts and Basic Operations

Remote Control

These pages describe the buttons on the remote control used to operate the receiver.
SOURCE
SELECT
CD
TAPE
TUNER
1
DVD
LD
2
TV
CONTROL
SURROUND
3
FUNCTION
4
CHANNEL
SELECT
5
RECEIVER
STANDBY/ON
6
7
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
1 SOURCE SELECT buttons
Use these buttons to select the remote operation
mode.
For example, pressing TUNER sets the remote to
operate the tuner functions.
2 SURROUND button
Press to select the receiver for remote control
operation.
3 FUNCTION button
Press repeatedly to select a source.
4
Press repeatedly to select the
mode.
(refer to page 28)
5 CHANNEL SELECT
Use to select a speaker when adjusting speaker
levels.
6 LEVEL (–/+)
Use to adjust individual speaker levels.
7 RECEIVER
STANDBY/ON button
Press to switch the receiver on or to put in standby.
8 TUNER operations
page 32-35)
(+/–)
CHANNEL STATION
preset station.
TV FUNC.BAND : Switches between AM and FM
bands.
TV VOL.FREQ. :Changes the tuner frequency.
MPX : swiches between stereo and mono.
CLASS :changes preset bank(class)
DIRECT ACCESS : allows direct keying in of
22
<ARB7192>
CHANNEL
STANDBY/ON STATION
TV FUNC. TV VOL.
BAND FREQ.
8
DIRECT
MPX CLASS .ACCESS
1 2 3
4 5 6
9
TEST TONE
7 8 9
ATT.
CD DISC
0
0
DSP MODE MUTING
-
LEVEL
=
MASTER
EFFECT VOLUME
~
Î
(Dolby) Surround
(press TUNER first)(refer to
: Selects next /Previous
frepuency.
9 Number buttons/Surround setting buttons
These buttons can perform a variety of different
functions depending on the remote operation mode.
• [RECEIVER operations (press SURROUND first)]
%˜fi˜@˜# buttons : Specific use of these buttons is
described in conjunction with the operations they are
used in.
TEST TONE : Press to switch the test tone on or off
when listening to a surround mode (refer to page 20).
ATT : Press to attenuate (lower) the level of the input
signals and prevent distortion (refer to "Display", 5,
Overload indicator on page 21).
• [TUNER operations (press TUNER first)]
Number buttons (0~9) : During preset tuning, use to
input the number of the preset station. Use to input
the station frequency during direct tuning.
0 MUTING button
Press to mute the volume. "MUTING" appears in the
display. Press again to cancel.
- DSP MODE
Press repeatedly to select a DSP sound mode (refer to
page 29).
= MASTER VOLUME(+/–) buttons
Press to adjust the volume. When VOL (+/–) buttons
are pressed while muting, muting is canceled.
~ EFFECT (+/–)
Use to adjust the DSP mode effect level.