Pioneer VSX-D498 Operating Instructions Manual page 20

Setting the volume level of each channel (Adjusting the speaker volume balance)
• Sound from the SUB WOOFER seems quite.
memo
• The speaker volume can be adjusted without outputting the test tone by pressing CHANNEL LEVEL or
CHANNEL SELECT .
• Initial setting is 0 dB.
SOURCE
SELECT
CHANNEL
CD STANDBY/ON STATION
TV FUNC. TV VOL.
TAPE BAND FREQ.
DIRECT
TUNER MPX CLASS .ACCESS
DVD
1 2 3
LD
4 5 6
TV
TEST TONE
CONTROL
7 8 9
SURROUND ATT.
CD DISC
0
1
FUNCTION DSP MODE MUTING
CHANNEL
LEVEL
SELECT
4
RECEIVER MASTER
STANDBY/ON EFFECT VOLUME
AV MULTI-CHANNEL RECEIVER Î
REMOTE CONTROL UNIT
20
<ARB7192>
1
Press button.
2
Press VOL + or – to adjust the volume to an appropriate
level.
3
Press TEST TONE to output the test tone.
The test tone is output in the following order.
3,5
FL
SW
2
• Depending on the "SPEAKER setting mode" chosen, some
memo
channels may not output test tone (refer to page 16).
• Test tone is only output in Dolby mode.
4
Adjust speaker levels so that you hear the test tone at
the same volume from each speaker when seated in the
main listening position.
The channel level ranges ± 10 dB.
memo
• Levels can be set for each surround mode.
• When both the DSP mode and Dolby Surroud mode are turned
on, priority is given to the Dolby Surround mode.
5
Press TEST TONE to turn off the test tone.
CT FR
SL
SR