Recording From Video Components - Pioneer VSX-D498 Operating Instructions Manual

Recording from Video Components

The following operations show you how to record audio and video to the video tape recorder connected to the VCR
jacks.
The receiver's volume, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no effect on the
memo
recorded signal.
SOURCE
SELECT
CHANNEL
CD STANDBY/ON STATION
TV FUNC. TV VOL.
TAPE BAND FREQ.
TUNER MPX CLASS .ACCESS
DVD
1 2
LD
4 5
TV
TEST TONE
CONTROL
7 8
SURROUND ATT.
CD DISC
0
1 FUNCTION DSP MODE MUTING
CHANNEL
SELECT LEVEL
RECEIVER MASTER
STANDBY/ON EFFECT VOLUME
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
SIGNAL SELECT
1
1
Select the component you want to record.
Be sure to press SIGNAL SELECT on the front panel to choose
"ANALOG". (Refer to "Switching ANALOG/DIGITAL signal input" on
page 26.)
2
Prepare the program source.
DIRECT
(Load the DVD or LD, etc.)
3
6
3
Insert a blank tape into the video tape recorder VCR.
9
4
Start recording on the video tape recorder, then start
playback from the source component.
Î
memo
• Recording cannot be made from analog to digital, and similarly
from digital to analog.
• When recording a DVD, the recorded image may flicker or be
difficult to view because of the copy protection signal
programmed on the DVD.
Other Operations
37
<ARB7192>