Connecting Other Video Sources - Pioneer Elite VSX-56TXi Operating Instructions Manual

Connecting your equipment

Connecting other video sources

You can basically use any of the audio/video inputs on
this receiver for any kind of video source. The example
illustration below shows a component connected to the
VCR2 inputs.
1 Connect the analog audio outputs and a video
output of the source component to a set of spare
audio/video inputs on this receiver.
• Use a stereo RCA phono cable for the audio
connection and a standard RCA video or S-video
cable for the video connection.
S400
S400
CENTER
2
DIGITAL OUT
R AUDIO L
OPTICAL COAXIAL
LD player, video player, TV game, etc.
• See About the video converter on page 16 if you plan
to use a different type of video cable than you used to
connect your TV.
2 If the source component has a digital audio
output, connect it to a spare digital audio input on
this receiver.
• Use a coaxial digital audio cable or an optical cable
for the connection depending on the type of input you
used.
• You may need to assign the digital input you used
when setting up the receiver (see Assigning the
digital inputs on page 77).
1
VIDEO S-VIDEO
AV OUT
03
AC IN
SWITCHED 100W(0.8A)MAX
SELECTABLE
VSX-56TXi
23
En