Wiring
3.1
Wiring and block diagram
This section contains the block diagram of the module and outlines various wiring options.
You can find information on wiring the front connector, creating a cable shield, etc. in the
Wiring section of the S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792) system manual.
Wiring and block diagram
The figure below shows you how to wire the module and the assignment of the channels to
the addresses (input byte a to input byte d).
①
M
Figure 3-1
Digital input module DI 32x24VDC BA (6ES7521-1BL10-0AA0)
Manual, 12/2016, A5E32363711-AD
Backplane bus interface
Ground
Block diagram and terminal assignment
CHx
Channel or channel status LED (green)
RUN
Status display LED (green)
ERROR
Error display LED (red)
3
13