Table of Contents
Advertisement
Parts Ordering
When corresponding with your Emerson Process Management sales office about this equipment, always mention the
valve serial number. When ordering replacement parts, also specify the key number, part name, desired material,
using the Parts List table.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
ENVIRO-SEAL Packing Arrangements
Retrofit kits and repair kits are listed in the following tables. For additional parts and repair information, refer to the
ENVIRO-SEAL Packing System for Rotary Valves Instruction Manual (D101643X012) or contact your Emerson Process
Management sales office for assistance.
Retrofit Kits for ENVIRO-SEAL Packing
Retrofit kits include new parts for the key numbers listed in the table below (see figure 6 for part locations).
Key
100
101
102
103
105
106
107
111
112
1. Diameter through the packing box.
ENVIRO-SEAL Packing System Retrofit Kits For Fisher A41
SHAFT DIAMETER
SHAFT DIAMETER
mm
12.7
15.9
19.1
25.4
31.8
38.1
PARTS INCLUDED IN KIT
SINGLE PTFE PACKING
Inches
For Actuator End Packing Box
1/2
5/8
3/4
1
1-1/4
1-1/2
Description
Packing stud
Packing nut
Packing flange
Spring pack ass'y
Packing set
Anti-extrusion washer
Packing box ring
Tag
Tie cable
RRTYXRT0972
RRTYXRT0982
RRTYXRT0992
RRTYXRT1012
RRTYXRT1022
RRTYXRT1032
GRAPHITE PACKING
For Actuator End Packing Box
RRTYXRT1072
RRTYXRT1082
RRTYXRT1092
RRTYXRT1102
RRTYXRT1112
RRTYXRT1122
27
Hide quick links:
Advertisement
Table of Contents
