Test Tools Manual; Service Notes; Installation Notes - HP 330 Service Information Manual

Test Tools Manual
Series 200/300 Test Tools Manual supports a software package for verifying the integrity of
~v1odel
330/350 computer system installations. The Test Tools manual and its associated discs
or tape permit troubleshooting computer systems in failure analysis. Part numbers for the
complete Test Tools packages are:
• 09800-12300 for 3.5-inch disk drives .
• 09800-12700 for 5.25-inch disk drives.
Contents of the four parts of the Test Tools Manual are
Part No. and Title
Contents
Part I, Introduction and Built-In Tests Introduces the Test Tools package and overviews the
computer self-tests and explains what the different tests
do.
Part II, Computer Tests
Part III, System Functional Tests
Part IV, CS/80 Exercisers
Service Notes
Covers loading and running of Series 200 and 300 Com-
puter Tests. Each test is explained as to what it does.
Error messages are listed and explained.
Tells how various computer-peripheral tests are loaded
and run. Tests are explained, error messages shown and
defined. Examples of some tests are given. Includes
tests for HP-HIL devices.
Explains how tests for CS/80 disc drives are loaded, ran,
and results are interpreted. Error messages are shown
as well as several examples of running the tests.
'iVhen a situation occurs that effects servicing of the computer or bus expander that is not
covered in existing documentation, a Service Note is written to explain it. Service Notes are
distributed through a Subscription Service to HP Customer Engineers and to customers on the
Cooperative Support Program for these products. Being half-page in size, they are intended to
be placed in Chapter 11 of the Model 350 Service Handbook.
Installation Notes
Each separately available accessory or upgrade has an Installation Note packaged with it. These
Notes have instructions for configuring and installing the hardware.
Product Information
15