Siemens SITRANS F M MAG 8000 Operating Manual page 9

MAG 8000 & MAG 8000 CT
Maximum allowable
torques
(continued)
Remote installation
Installation of add-on
module
2. Installation
Nominal size
mm inch
25 1"
40 1½"
50 2"
65 2½"
80 3"
100 4"
125 5"
150 6"
200 8"
250 10"
300 12"
350 14"
400 16"
450 18"
500 20"
600 24"
Verify that the model and serial numbers shown on the labels of the sensor and transmitter are
matched properly (1). Make sure that the cable is safety installed to avoid damaging of cable and
connectors. Please note the different connector types for the coil and electrodes, both having a
minimum diameter of 90 mm (3.6 inches). Save the dust covers for future use and protection (2).
Make sure the connectors are clean and fastened securely to achieve a good connection and
watertight seal (3 & 4).
Note
If dirt enters the connector ends, use plain water for cleaning. Ensure the connectors are
completely dry before making connections.
SFIDK.PS.026.D9.02
PN 10 PN 16
Nm f/lbs Nm f/lbs
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A 25 18
N/A N/A 25 18
N/A N/A 25 18
N/A N/A 25 18
N/A N/A 29 21
N/A N/A 50 37
50 37 50 37
50 37 82 61
57 42 111 82
60 44 120 89
88 65 170 125
92 68 170 125
103 76 230 170
161 119 350 258
The module must be mounted on the backside
of the MAG 8000 or MAG 8000 CT electronic.
Use the two 3 mm screws and washers to fix the
module to the MAG 8000 or MAG 8000 CT
electronic, with maximum torque 0.5 Nm.
PN 40 Class 150
Nm f/lbs Nm f/lbs
10 7 7 5
16 12 9 7
N/A N/A 25 18
N/A N/A 25 18
N/A N/A 34 25
N/A N/A 26 19
N/A N/A 42 31
N/A N/A 57 42
N/A N/A 88 65
N/A N/A 99 73
N/A N/A 132 97
N/A N/A 225 166
N/A N/A 210 155
N/A N/A 220 162
N/A N/A 200 148
N/A N/A 280 207
9