Table of Contents
Advertisement
Button Board Cover
(Internet Zone and Status Lights)
Note: Illustrations may show parts removed that are not part of this procedure. It is
necessary to remove only the parts listed in the written procedure.
To remove the button board cover, complete the following steps:
1. Prepare the Notebook for disassembly
2. Open the display and squeeze the sides of the display assembly hinge covers while
sliding them off the hinges.
Continued on the next page.
Presario 1800/1800T Series
Models: XL280, XL380, XL381,
and XL390
(pg
10).
Advertisement
Table of Contents
Troubleshooting
