Power Settings - Compaq XL280 Maintenance & Service Manual

Power Settings

Power management modes can be initiated based on the amount of time passed since the
last system activity. System activity includes keyboard strokes, mouse movement, CD/DVD
playback, or modem use.
Power Schemes
Different patterns of Notebook use determine the level of power management needed.
Power management settings can be selected using several predefined Power Schemes.
To access these options, select Power Management on the Control Panel, then click the
Power Schemes tab. The default Power Schemes are Home/Office Desk, Portable/Laptop,
and Always On. Power Schemes can also be customized by changing the following options:
System Standby: length of inactivity before the Notebook goes into Standby mode.
•
Turn Off Monitor: length of inactivity before the screen times out and goes blank.
•
Turn Off Hard Disks: length of inactivity before the hard drive goes into low-power
•
mode.
Hibernate: length of inactivity before the Notebook goes into Hibernation mode.
•
Important: The setting for the Hard Disk must be less than or equal to the setting for
the System. If the Notebook is on a network, Compaq recommends that System Standby
be set to Never.
The following table shows the default settings for each Power Scheme.
Power Scheme
AC Power
System Standby
Turn OFF Monitor
Turn OFF Hard Disks
Hibernate
Battery Power
System Standby
Turn OFF Monitor
Turn OFF Hard Disks
Hibernate
Presario 1800/1800T Series
Models: XL280, XL380, XL381,
and XL390
Portable/
Always On
Laptop
Never Never
20 minutes 3 hours
Never 15 minutes
Never Never
Never 15 minutes
15 minutes Never
30 minutes 10 minutes
Never 1 hour
Home/
Office Desk
Never
20 minutes
Never
Never
5 minutes
5 minutes
10 minutes
20 minutes