Compaq XL280 Maintenance & Service Manual page 45

Error Code Description
101-xx CPU test failed
102-xx Coprocessor or Weitek Error
103-xx DMA page registers test failed
104-xx Interrupt controller master test
failed
105-xx Port 61 error
106-xx Keyboard controller self-test
failed
107-xx CMOS RAM test failed
108-xx CMOS interrupt test failed
109-xx CMOS clock test failed
110-xx Programmable timer load data
test failed
113-xx Protected mode test failed
114-01 Speaker test failed
Error Code Description
200-xx Memory machine ID test failed
202-xx Memory system ROM checksum
failed
203-xx Write/Read test failed
204-xx Address test failed
211-xx Random pattern test failed
214-xx Noise test failed
215-xx Random address test failed
Presario 1800/1800T Series
Models: XL280, XL380, XL381,
and XL390
Processor Test Error Codes
Memory Test Error Codes
Recommended Action
Replace the processor
1. Run the Configuration and Diagnostics
utilities.
2. Replace the processor
The following solution applies to error
codes 103-xx through 113-xx:
Replace the system board
1. Check system configuration.
2. Verify cable connections to speakers.
3. Replace the system board
Recommended Action
1. Flash the system ROM and retest.
2. Replace the system board
The following steps apply to error codes
203-xx through 215-xx:
1. Remove the memory module
retest.
2. Install a new memory module
retest.
and retest.
and retest.
and retest.
and retest.
and retest.
and
and