Compaq XL280 Maintenance & Service Manual page 76

Speaker Assembly Cable
The position for the speaker assembly cable is shown below. The cable is routed under the
battery charger board and under the edge of the system board.
Ä
CAUTION: When servicing the Notebook, make sure that cables are placed in
their proper locations during the reassembly process. Improper cable placement
can damage the Notebook.
The following illustrations show the proper placement for other cables in the unit:
Hard Drive Ribbon Cable
•
CD/DVD Ribbon Cable
•
To remove or replace the speaker assembly, see
later in this chapter.
Presario 1800/1800T Series
Models: XL280, XL380, XL381,
and XL390
•
•
Speaker Assembly Removal Procedures
Diskette Drive Ribbon Cable
Keyboard Ribbon Cable