Table of Contents
Advertisement
The System Setup menu
08
Checking your Acoustic Calibration EQ settings
After you have completed an automatic or manual
Acoustic Calibration EQ adjustment, you can check the
ALL CH ADJUST, FRONT ALIGN and custom settings
using the on-screen display.
1
Select 'EQ Data Check' from the Manual MCACC
setup menu.
3.Manual MCACC
a.Fine Ch Level
b.Fine SP Distance
c.EQ Auto Setting
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check
2
Select the setting you want to check.
• It is useful to do this while a source is playing so you
can compare the different settings.
3
Select the channels you want, pressing ENTER
when you're finished checking each one.
4
When you're finished, press RETURN.
You return to the Manual MCACC setup menu.
Manual speaker setup
This receiver allows you to make detailed settings to
optimize the surround sound performance. You only
need to make these settings once (unless you change the
placement of your current speaker system or add new
speakers.).
These settings are designed to fine-tune your system, but
if you're satisfied with the settings made in Automatically
setting up for surround sound (MCACC) on page 8, it isn't
necessary to make all of these settings.
Caution
• The test tones used in the System Setup are output at
high volume.
1
Select 'Manual SP Setup' then press ENTER.
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
2
Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
Note
1 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround, and surround back speakers can't
be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.
40
En
3g.EQ Data Check
ALL CH ADJUST
[ Left
]
40Hz : + 1.0dB
125Hz :
0.0dB
250Hz :
0.0dB
4kHz :
0.0dB
13kHz :
0.0dB
TRIM :
0.0dB
:Return
:Return
4.Manual SP Setup
a.Speaker Setting
b.Crossover Network
c.Channel Level
d.Speaker Distance
e.THX Audio Setting
f.THX Speaker Setup
: Exit
:Return
• Speaker Setting – Specify the size and number of
speakers you've connected (page 40).
• Crossover Network– Specify which frequencies will
be sent to the subwoofer (page 41).
• Channel Level – Adjust the overall balance of your
speaker system (page 41).
• Speaker Distance – Specify the distance of your
speakers from the listening position (page 42).
• THX Audio Setting – Specify the distance of your
surround back speakers from each other (page 42).
• THX Speaker Setup – Specify whether or not you
have a THX speaker system (page 43).
3
Make the adjustments necessary for each
setting, pressing RETURN to confirm after each
screen.
Speaker Setting
Use this setting to specify your speaker configuration
(size, number of speakers). It is a good idea to make sure
that the settings made in Automatically setting up for
surround sound (MCACC) on page 8 are correct.
1
Select 'Speaker Setting' from the Manual SP
Setup menu.
4.Manual SP Setup
a.Speaker Setting
b.Crossover Network
c.Channel Level
d.Speaker Distance
e.THX Audio Setting
f.THX Speaker Setup
:Return
2
Choose the set of speakers that you want to set
then select a speaker size.
Use
to select the size (and number) of each of the
following speakers:
• Front – Select LARGE if your front speakers
reproduce bass frequencies effectively, or if you
didn't connect a subwoofer. Select SMALL to send
the bass frequencies to the subwoofer.
• Center – Select LARGE if your center speaker
reproduces bass frequencies effectively, or select
SMALL to send bass frequencies to the other
speakers or subwoofer. If you didn't connect a center
speaker, choose NO (the center channel is sent to
the other speakers).
• Surr – Select LARGE if your surround speakers
reproduce bass frequencies effectively. Select
SMALL to send bass frequencies to the other
speakers or subwoofer. If you didn't connect
surround speakers choose NO (the sound of the
surround channels is sent to the other speakers).
4a.Speaker Setting
Front
SMALL
Center
[ SMALL ]
Surr
[ SMALL ]
SB
[ SMALL x2 ]
SUB W.
YES
[ THX : ALL SMALL ]
:Finish
1
Advertisement
Table of Contents
