ZALMAN CNPS12X User Manual page 11

B. Cooler Installation ( Intel / AMD Socket )
※ After installation of the Clip Support depending on a user's socket type,
install Cooler according to the direction below.
① Apply a suitable amount of the included Thermal Grease on
the CPU's surface.
② Insert clip into the hole of heatsink's base and fasten bolts by wrench.
③ Connect the cooler's 3-pin connector to the motherboard's CPU Fan header.
<Normal Mode>
WWW.ZALMAN.COM
<Quiet Mode>
Intel or AMD
CPU
Clip
Heatsink Base
RC5
(Fan RPM Resistor)
Motherboard
Connector
wrench
10