6. Slide the shift cable retainer forward until resistance is felt, then slide the
cable anchor toward the rear until resistance is felt.
7. Center the anchor pin between these resistance points.
a -
Anchor pin
b -
Shift cable retainer
Adjusting the Shift Cable
To adjust the shift cable:
1. Align the shift cable end guide with the center mark as instructed in
Locating the Center Point of the Shift Cable.
a -
Center mark
2. Place the shift cable end guide on the anchor pin and adjust the cable
barrel so that it slips freely into the barrel holder.
OUTBOARD INSTALLATION
a
a
b
4363
96
4362
eng