HP proliant DL380 GEN9 User Manual page 79

Remove the blank from the optional 2-slot PCI riser cage.
6.
Install an optional expansion board into the PCI riser cage.
7.
Install the optional 2-slot PCI riser cage.
8.
Connect any required internal or external cables to the expansion board. See the documentation that
9.
ships with the expansion board.
Install the access panel (on page 28).
10.
Slide the server into the rack.
11.
Connect each power cord to the server.
12.
Connect each power cord to the power source.
13.
Hardware options installation 79