Maximum Capacity; Advanced Ecc Memory Configuration; Online Spare Memory Configuration - HP proliant DL380 GEN9 User Manual

To optimize server availability, the server supports the following AMP modes:
•
Advanced ECC—Provides up to 4-bit error correction. This mode is the default option for this server.
•
Online spare memory—Provides protection against failing or degraded DIMMs. Certain memory is
reserved as spare, and automatic failover to spare memory occurs when the system detects a DIMM
that is degrading. This allows DIMMs that have a higher probability of receiving an uncorrectable
memory error (which would result in system downtime) to be removed from operation.
•
Mirrored memory—Provides maximum protection against failed DIMMs. Uncorrectable errors in one
channel are corrected by the mirror channel.
Advanced Memory Protection options are configured in the BIOS/Platform Configuration (RBSU). If the
requested AMP mode is not supported by the installed DIMM configuration, the server boots in Advanced
ECC mode. For more information, see the HPE UEFI System Utilities User Guide for HPE ProLiant Gen9
Servers on the Hewlett Packard Enterprise website (http://www.hpe.com/info/ProLiantUEFI/docs).

Maximum capacity

DIMM type
RDIMM
RDIMM
RDIMM
RDIMM
LRDIMM
LRDIMM
LRDIMM
For the latest memory configuration information, see the QuickSpecs on the Hewlett Packard Enterprise
website (http://www.hpe.com/info/qs).

Advanced ECC memory configuration

Advanced ECC memory is the default memory protection mode for this server. Standard ECC can correct
single-bit memory errors and detect multi-bit memory errors. When multi-bit errors are detected using
Standard ECC, the error is signaled to the server and causes the server to halt.
Advanced ECC protects the server against some multi-bit memory errors. Advanced ECC can correct
both single-bit memory errors and 4-bit memory errors if all failed bits are on the same DRAM device on
the DIMM.
Advanced ECC provides additional protection over Standard ECC because it is possible to correct certain
memory errors that would otherwise be uncorrected and result in a server failure. Using HPE Advanced
Memory Error Detection technology, the server provides notification when a DIMM is degrading and has a
higher probability of uncorrectable memory error.

Online Spare memory configuration

Online spare memory provides protection against degraded DIMMs by reducing the likelihood of
uncorrected memory errors. This protection is available without any operating system support.
Online spare memory protection dedicates one rank of each memory channel for use as spare memory.
The remaining ranks are available for OS and application use. If correctable memory errors occur at a rate
higher than a specific threshold on any of the non-spare ranks, the server automatically copies the
memory contents of the degraded rank to the online spare rank. The server then deactivates the failing
rank and automatically switches over to the online spare rank.
DIMM capacity (GB)
8
16
16
32
32
64
128
DIMM rank One processor
(GB)
Single 96
Single 192
Dual 192
Dual 384
Dual 384
Quad 768
Octal 1536
Two processors
(GB)
192
384
384
768
768
1536
3072
Hardware options installation 69