HP proliant DL380 GEN9 User Manual page 116

Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 26).
o
Remove the server from the rack (on page 27).
o
Remove the access panel (on page 27).
4.
Remove the FlexibleLOM PCIe blank.
5.
Install the component:
6.
Firmly seat the FlexibleLOM in the slot.
a.
Tighten the thumbscrew.
b.
Hardware options installation 116