Receiver - Pioneer DVR-LX70 Operating Instructions Manual

Connections
02
Connecting to an AV
amplifier or receiver
To enjoy multichannel surround sound you
need to connect this recorder to an AV
amplifier/receiver using the digital coaxial
output. In addition to the digital connection,
we recommend also connecting using the
stereo analog connection.
You'll probably also want to connect a video
output to your AV amplifier/receiver. Use the
standard (composite) video output (as
shown here), or the S-Video or component
video connections.
See also Audio Out on page 111 for how to
set up the digital audio output. (Noise may
be output from your speakers if the recorder
is not set up to work with your AV amplifier/

receiver.)

Important
• Do not connect this recorder to your TV
'through' your VCR or other component
using A/V cables. Always connect it
directly to your TV.
Note
1 If your AV amplifier/receiver doesn't have an coaxial digital input, but has a optical type, converter boxes that
20
convert from coaxial to optical are available at specialist audio dealers.
En
Antenna/cable TV
1
wall outlet
ANTENNA
IN (RF IN)
ANTENNA COMPONENT VIDEO OUT
P
P R B Y
IN
OUTPUT 2
INPUT 3
S-VIDEO S-VIDEO
AUDIO VIDEO
R L
CONTROL
IN
OUT
R AUDIO L VIDEO
INPUT 1/AUTO START REC
OUTPUT 1
ANTENNA
OUTPUT 1
OUT
2
To audio/video input
1
AV amplifier/receiver
To antenna
input
TV
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your AV
amplifier/receiver.
3 Use an coaxial digital audio cable (not
supplied) to connect the DIGITAL AUDIO
OUT (COAXIAL) jack on this recorder to
an coaxial digital input on your AV
amplifier/receiver.
This enables you to listen to multichannel
1
surround sound.
4 Connect the AV amplifier/receiver's
video output to a video input on your TV.
DIGITAL
AUDIO OUT
AC IN
HDMI OUT COAXIAL
DIGITAL
AUDIO OUT
To digital
3
input
From video
output
4
To video
input