Pioneer DVR-LX70 Operating Instructions Manual page 118

The Initial Setup menu
14
Setting
Options
On Screen Display
Front Panel Display On •
Remote Control
Mode
DivX VOD
Set Preview
(HDD only)
Options 2
USB
HDD Sleep Mode
118
En
Options Explanation
On • The recorder displays operation displays (Stop, Play,
etc.) on-screen.
Off
Switches off the on-screen operation displays.
The time is shown in the front panel display when the
recorder is in standby.
Off The front panel display is switched off in standby.
Recorder 1–3 If you are using more than one recorder in the same
room, set them to different IDs. This setting sets the
(default: Recorder 1)
recorder ID; to change the remote controller ID,
press and hold RETURN then press 1, 2 or 3 to set.
The remote will only control a recorder with the same
ID.
Registration Code Use to display the recorder's DivX registration code.
See DivX video compatibility and DivX® VOD content
on page 10.
Quick Preview •
When in the Disc Navigator, the thumbnail video
plays short excerpts from throughout the selected
title. (Note that edited titles that will play normally
from the beginning.)
Normal The thumbnail video plays from the beginning of the
title.
Restart USB
If the connected USB device does not respond to the
recorder, try using this option to restart it. If the
Device
device still does not work properly try switching it off
then back on, and/or disconnecting then
reconnecting the USB cable.
Confirm Printer
Use this option to confirm the make and model of the
printer connected to the recorder (does not work with
all printers).
Proceed Puts the HDD to sleep. Using this feature when
playing DVDs or CDs allows you to reduce noise
produced by the unit, resulting in improved sound
quality. When you wake the HDD back up it will take
a few seconds to load.
The HDD can be taken out of Sleep Mode by any
number of actions, including:
• Turning the power off and on again.
• Pressing the HDD/DVD button and choosing the
HDD.
• When a timer recording begins.
• When you try and make any changes to system
settings.