Receiver (1) - Pioneer DVR-LX70 Operating Instructions Manual

Connections
02
Connecting to a cable box or
satellite receiver (1)
If you are using a cable box or satellite
receiver with only a few scrambled channels,
follow the setup on this page
the channels are scrambled, we recommend
using the setup on the following page.
Using the setup on this page you can:
• Record unscrambled channels by
selecting them on this recorder.
• Record scrambled channels by selecting
them on the cable box/satellite receiver
and using the Auto Start Recording
feature (see Automatic recording from a
satellite tuner on page 47).
• Watch one channel while recording
another.
Important
• Do not connect this recorder 'through'
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
Note
1 The diagram shows standard video connections, but you can alternatively use the S-Video or component video
18
connections if they're available.
En
1
. If many or all
1
1
1
This enables you to watch and record TV
channels.
2
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your TV
using a set of A/V cables (as supplied).
This enables you to watch the output from
this recorder.
3
your cable box/satellite receiver to the
INPUT 1 jacks on this recorder using a set
of A/V cables.
This enables you to record scrambled TV
channels.
Antenna/cable TV
1
wall outlet
ANTENNA
IN (RF IN)
ANTENNA COMPONENT VIDEO OUT
P P Y
IN R B
OUTPUT 2
INPUT 3
S-VIDEO S-VIDEO
AUDIO VIDEO
R L
CONTROL
IN
OUT
R AUDIO L VIDEO
INPUT 1/AUTO START REC
OUTPUT 1
ANTENNA
OUTPUT 1
OUT
INPUT 1/AUTO
START REC
To antenna
input
From antenna
Cable box/
output
Satellite receiver
To antenna
input
TV
Connect RF antenna cables as shown.
Connect the AUDIO and VIDEO
Connect the audio/video output of
DIGITAL
AUDIO OUT
AC IN
HDMI OUT COAXIAL
3
From audio/
2
video output
To audio/
video input