Using Other Types Of Video Output - Pioneer DVR-LX70 Operating Instructions Manual

Connections
Using other types of video
output
This recorder has standard (composite),
S-Video and component video outputs. The
main difference between them is the quality
of the picture. S-Video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
To component
video input
2
TV
COMPONENT
VIDEO OUT
ANTENNA COMPONENT VIDEO OUT
P R P B Y
IN
OUTPUT 2
INPUT 3
S-VIDEO S-VIDEO
AUDIO VIDEO
R L
CONTROL
IN
OUT
R L
INPUT 1/AUTO START REC AUDIO VIDEO
OUTPUT 1
S-VIDEO
OUTPUT
To S-Video
input
1
DIGITAL
AUDIO OUT
AC IN
HDMI OUT COAXIAL
1 Connecting using an S-Video output
S-Video carries the picture as separate
colour and luminance (brightness) signals.
There are two S-Video outputs for
connection to TVs, monitors, VCRs or other
equipment.
• Use an S-Video cable (not supplied) to
connect an S-VIDEO OUTPUT (1 or 2) to
an S-Video input on your TV, monitor (or
other equipment).
2 Connecting using the component
video output.
Component video carries the picture as two
separate colour signals, plus a luminance
(brightness) signal.
See also Component Video Out on page 110
for how to set up the component video
output for use with a progressive scan-
compatible TV.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor (or other
equipment).
02
17
En