Specifying A Source Ip Address For Outgoing Portal Packets; Specifying An Automatic Redirection Url For Authenticated Portal Users - HP 12500 Series Configuration Manual

Specifying a source IP address for outgoing portal
packets
After you specify a source IP address for outgoing portal packets on an interface, the specified IP address
is used as the source IP address of packets that the access device sends to the portal server, and the
destination IP address of packets that the portal server sends to the access device.
In NAT environments, HP recommends specifying the interface's public IP address as the source IP
address of outgoing portal packets.
To specify a source IPv4 address for outgoing portal packets:
Step
1. Enter system view.
2. Enter interface view.
3. Specify a source IPv4 address
for outgoing portal packets.
To specify a source IPv6 address for outgoing portal packets:
Step
1. Enter system view.
2. Enter interface view.
3. Specify a source IPv6 address
for outgoing portal packets.
Specifying an automatic redirection URL for
authenticated portal users
When an unauthenticated user goes to the portal authentication page for portal authentication, after the
user passes portal authentication, if the access device is configured with an automatic redirection URL, it
redirects the user to the URL.
To specify an automatic redirection URL for authenticated portal users:
Command
system-view
interface interface-type
interface-number
portal nas-ip ipv4-address
Command
system-view
interface interface-type
interface-number
portal nas-ip ipv6 ipv6-address
115
Remarks
N/A
N/A
Optional.
By default, no source IPv4 address
is specified and the IPv4 address of
the user logon interface is used as
the source IPv4 address of
outgoing portal packets.
Remarks
N/A
N/A
Optional.
By default, no source IPv6 address
is specified and the IPv6 address of
the user logon interface is used as
the source IPv6 address of
outgoing portal packets.