4.3
Installing on an S7-1500 standard rail
Procedure
Follow the steps below to fit the SCALANCE W774/W734 to an S7-1500 standard rail:
1. Place the device on the upper edge of the S7-1500 standard rail as shown in the figure.
2. Screw the housing to the S7-1500 standard rail. The required screw ships with the
device.
SCALANCE W774-1/W734-1
Operating Instructions, 09/2015, C79000-G8976-C325-06
4.3 Installing on an S7-1500 standard rail
Mounting
17