Installing On The S7-1500 Standard Rail - Siemens SCALANCE W788 Operating Instructions Manual

4.4

Installing on the S7-1500 standard rail

Follow the steps below to install the SCALANCE W7x8 on a vertical S7-1500 rail:
1. Place the device on the upper edge of the S7-1500 standard rail (position A).
2. Screw the device to the rail using the supplied screw (position B).
Figure 4-3
SCALANCE W788-x / W748-1
Operating Instructions, 09/2017, A5E03678333-12
Installing on an S7-1500 standard rail
4.4 Installing on the S7-1500 standard rail
Mounting
31