Installing On A Din Rail / Removing - Siemens SCALANCE W774-1 Operating Instructions Manual

Mounting

4.4 Installing on a DIN rail / removing

4.4 Installing on a DIN rail / removing
Procedure for installation
Follow the steps below to fit the SCALANCE W774/W734 to a DIN rail:
1. Place the device on the upper edge of the DIN rail as shown in the figure.
2. Press the device against the DIN rail until the DIN rail slider catch locks in place.
18
SCALANCE W774-1/W734-1
Operating Instructions, 09/2015, C79000-G8976-C325-06