Install - Integra DTM-6 Instruction Manual

> Before Start > Part Names
15.Input dial: Switches the input to be played. Turn the
control to switch the source in the following order;
BD/DVD#CBL/SAT#PC#GAME#TV/TAPE#
CD#PHONO#AM#FM#NET#BLUETOOTH.
16.Bass dial: Adjusts the bass.
17.Treble dial: Adjusts the treble.
18.Balance dial: Adjusts the balance of the sounds output
from the left and right speakers.
19.Memory button: Used to register AM/FM radio stations
(P25).
Menu button: Used to display the menu.
20.Tuning Mode button:
Switches tuning to an AM/FM station between
automatic tuning and manual tuning (P23).
Play/Pause button: Used for play operations when
playing Music Server or USB.
21.Preset 2 1 buttons: Used to select AM/FM radio
stations.
Skip (:/9) buttons: Used for play operations
when playing Music Server or USB.
22.USB jack: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (maximum 5 V/0.5 A) to USB devices
with a USB cable.
0 When connecting a HDD that requires more than
5 V/0.5 A, connect to the USB port (maximum 5 V/
1 A) on the rear of the unit.
> Install > Initial Setup
 
 
Display
1. The currently selected speaker system lights.
2. Lights in the following conditions.
Ë: When headphones are connected
Z2: ZONE 2 is on.
: When connected via BLUETOOTH
: When connected by Wi-Fi
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the USB
is not properly connected.
DIGITAL: Digital signals are input and the digital input selector is
selected.
3. Lights according to the type of input digital audio signals.
4. Lights in the following conditions.
RDS (European Models): Receiving RDS broadcasting.
TUNED: Receiving AM/FM radio.
FM ST: Receiving FM stereo.
SLEEP: Sleep timer has been set.
AUTO STBY: Auto Stby (P33) has been set.
5. Flashes when muting is on.
6. Speaker/Channel display: Displays the output channel of the speakers.
7. This may light when performing operations with the "NET" input
selector.
8. Displays various information of the input signals.
> Playback
Supplementary information | Advanced Setup | Others
  
 
En 5