Troubleshooting - JVC NX-F3B Service Manual

4.6 OTHER FUNCTION
4.6.1 SUMMARY
It memorize why it was performed between things of STANDBY by POWER ON of the last and receive TEST MODE
[POWER] + [STOP] + [3] and plan improvement of the hardware examination efficiency in what I display.
4.6.2 MEMORY AND INDICATION
The memory of the SAFETY item which IT detected assumes it a chisel for once of the last.
It dose not have it as a history.
The memory assumes it STANDBY memory / INH memory.
COLD SET (initial value)
POWER key of remote controller
POWER key of main body
SLEEP TIMER
STANDBY request by CEC
At SAFETY
SAFETY ERROR number
Not SAFETY ERROR (Normal)
Value of SAFETY ERROR port (AD)
* *
Value of SAFETY ERROR port (STATIC)
Not SAFETY ERROR (Normal)
This service manual does not describe TROUBLESHOOTING.
* = 0
* = 2
* = 3
* = 5
* = 8
* = -
= port number
= --
* * = AD value
* * = H or L
* * = --
SECTION 5

TROUBLESHOOTING

SYSTEM STATUS MODE
FL indication
S D. : @ @ :
(No.MB662<Rev.003>)1-25