Programming Instructions - Yale E5400LN Cylindrical Series Programming/Troubleshooting Instructions

Programming Instructions:

®
Code used for entry. The Master Code is always User Number 1 and is used only for
programming. The Master Code will not unlock the lock.
Use the record log on the last page to assign and log all user codes before proceeding on
to programming. Store the log in a secure location.
Example:
User Type
Master
Emergency
Supervis o r
L o c k o u t
Passage
U s e r
NO PROGRAMMING CAN BE MADE UNTIL THE MASTER & EMERGENCY CODES ARE
CHANGED FROM THE FACTORY SETTINGS
(Enter only underlined items into the keypad)
1-Change the Master Code
EXAMPLE: Change the Master Code from 1234 (factory default) to 3131.
# (Hold pound depressed until Yellow LED blinks continuously)
Enter current Master Code
Enter Program Command Code(PCC)
Enter User Number
Enter New Master Code (4-7 digits)
Re-enter New Master Code (4-7 digits)
Note: If Master Code is unknown (Red LED will flash instead of Yellow) refer to step 3.
2-Change the Emergency Code
EXAMPLE: Change the Emergency Code from 4321 (Factory Defualt) to 4848
# (Hold pound depressed until Yellow LED blinks continuously)
Enter current Master Code
Enter Program Command Code
Enter User Number
Enter New Emergency Code (4-7digit)
Re-enter New Emergency Code (4-7digit)
Emergency Code defaults to a 10 second Unlock time
Note: Emergency code is deleted when clear memory is used and must be reprogrammed.
An ASSA ABLOY Group brand
User Number
1
2
3
4
5
6 - 9 9
(See Example 1)
User Code
1 2 3 4 Factory Setting
4 3 2 1 Factory Setting
Select 4- 7 digits
Select 4-7 digits
Select 4-7 digits
Select 2-7 digits per user
1234 #
51#
1 #
3131#
3131#
Yellow LED Blinks
3131#
51# Yellow LED Blinks
2 #
4848#
4848 #
Yellow LED Blinks
Yellow LED Blinks
Yellow LED Blinks
Yellow LED Blinks
Yellow LED Blinks
Green LED Blinks
Yellow LED Blinks
Yellow LED Blinks
Yellow LED Blinks
Green LED Blinks
80-9150-8005-010 (10-12)
4