I.link Setup; Audio Out; Connections Setup - Pioneer DV-79AVi Operating Instructions Manual

Initial Settings menu
Move the cursor right (or press ENTER) then
use the Joystick (up/down) to set the channel
output level.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language 0.0dB
C
R 0.0dB
Display
0.0dB
RS
Options
0.0dB
LS
Speakers
0.0dB
SW

i.LINK Setup

To turn the test tone on/off for an individual
speaker, move the cursor right. The test tone
continues playing even when you select a
different speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language 0.0dB
C
0.0dB
R
Display
RS 0.0dB
Options
0.0dB
LS
Speakers
0.0dB
SW
i.LINK Setup
To save the settings and exit, press ENTER
with the channel level field highlighted (as
shown above).
• The subwoofer output will sound quite low
compared to the other speakers.
i.LINK Setup

Audio Out

• Default setting: On
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Initial Settings
Digital Audio Out Audio Out
Video Output

Connections Setup

Language Auto Select Play
Display DVD-Audio Out
Options
Speakers
i.LINK Setup
Change this setting to Off if the i.LINK inter-
face is still connected but you need to use one
of the other outputs. Changing this setting to
Off does not affect i.LINK thru data (i.e., if this
player is between two other i.LINK compo-
nents, it will still pass data between them).
Set back to On (i.LINK-ready) to be able to use
the i.LINK interface.
Connections Setup
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
This screen shows the equipment connected
using the i.LINK interface.
Components which are able to receive
i.LINK Audio are shown in black (an i.LINK
receiver, for example); those which can't (a
DV camcorder, for example) are shown in
gray. If the player can't display the name of a
component, '****' is shown; if the name
can't be determined, Unknown is displayed.
Select the component that you want to set up
the audio output formats for.
On
Off
This screen shows the output settings for
Dolby Digital, DTS and MPEG audio.
Depending on the other component, these
may be configured automatically. If this
Initial Settings
Digital Audio Out Audio Out
Video Output Connections Setup
Language Auto Select Play
Display DVD-Audio Out
Options
Speakers
i.LINK Setup
Initial Settings
Digital Audio Out Connections Setup
Video Output VSX-49TXi : Pioneer
Language
Display DolbyDigital
Options DTS
Speakers MPEG
i.LINK Setup
08
VSX-49TXi
VSX-AX10i
DV-47Ai
PCM
DTS
MPEG
77
En