Using The Setup Navigator; Enter - Pioneer XV-HTD510 Operating Instructions Manual

Using the Setup Navigator
Before playingm_y discs, w estronglyrecommend using
theSelupNavigalol: ThismakesallthebasicDVD
system settingsforyou.
C_C_C_C_
ic 0 Ez_i
umm_
Make sure that the system is switched on.
Alsoturn on your I__aud make sum that it is set to the
correct videoiuput.
• If a disc that's ah'eadyloaded starts to play,press I
to stop it.
Press DVD SETUP.
The SetupNavigator on-screen display (0SD) appears:
Genera]
(_)Setupus]ngtheSetupNavigator
_Move Senti E×t
Navigateall of the following0SDs using these controls:
A • -- CUfsor up/dowu
ENTER
-
selectthe highlighted menu opliou
- go back to the previousquestion
The control possibilitiesfor the current 0SD are showu
at the bottom of each screen.
3 Select START.
• If you decide uot to use the Setup Navigator;select
Auto Start Off here instead.
4 Choose an OSD menu language.
S Select the type of TV you have.
• SeeAsd)ectratiointheglossa_,onpage42ifyou're
uusureoflhedifference b etween widescreeu m_d
standardWs.
6 Select Save Changes to make the settings.
7 Press DVD SETUP to exit.
Cougratulmious,set up is complele!
Ifyou waut to use the Selup Navigaloragain at any
time, it is available from the General meuu. Also,
each indMdual settiug can be chmlged using the
appropriate meuu opliou--chapler 10 explains all
meuu oplious in detail.