Channel Level - Pioneer DV-79AVi Operating Instructions Manual

06 Audio Settings menu
1 Press HOME MENU and select 'Audio
Settings' from the on-screen display.
2 Highlight Virtual Surround, then use
the Joystick (left/right) to change to '2V/
SRS TruSurround' or 'Off', as required.
Audio Settings
Audio DRC
Legato PRO
Hi-Bit
Virtual Surround

Channel Level

3 Press ENTER to make the setting and
exit the Audio Settings screen.
• You can also use the SURROUND button
on the remote control to switch Virtual
Surround on (2V/SRS TruSurround)/
Off.
• Virtual Surround does not work with CD,
MP3, DVD-Audio or SACD discs, or 96kHz
Linear PCM soundtracks.
• The Virtual Surround effect is output only
through the analog AUDIO OUT (2ch)
jacks.
• Make sure that Audio Output Mode is
set to 2 Channel (see Audio Output Mode
on page 74).
• How good the surround effect is varies
with the disc.
56
En
Channel Level
This setting allows you to set the level of each
channel sent to the 5.1 channel analog
outputs.
1
1/ 2
Settings' from the on-screen display.
Off
Off
2
On
Joystick (left/right) to change to 'Fix' or
Off
'Variable', as required.
Fix
3
(down) to proceed to the next screen.
4
levels for each speaker.
• Default setting: Fix
Press HOME MENU and select 'Audio
Highlight Channel Level, then use the
Audio Settings
Audio DRC
Legato PRO
Hi-Bit
Virtual Surround
Channel Level
• Fix – Channel levels are fixed, but you can
set the speaker distances
• Variable – You can specify variable
channel levels as well as speaker
distances
If you chose Variable, use the joystick
Audio Settings
Audio DRC
Legato PRO
Hi-Bit
Virtual Surround
Channel Level
Variable setting only: Set the channel
Audio Settings
Channel Level L
Channel Level C
Channel Level R
Channel Level RS
Channel Level LS
Channel Level SW
1/ 2
Off
Off
On
Off
Fix
1/ 3
Off
Off
On
Off
Variable
2/ 3
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB