Channel Level - Pioneer DV-45A Elite Operating Instructions Manual

The Audio Settings Menu

Channel Level

• Default setting: Fix / all speakers 10 ft.
This setting allows you to set the level of
each channel sent to the 5.1 channel analog
outputs, and to set the distance of the
speakers from your listening position so that
the player can optimize the surround sound.
1 Press SETUP and select 'Audio Set-
tings' from the on-screen display.
Audio Settings
Play Mode
Initial Settings
2 Highlight Channel Level, then use the
Joystick (left/right) to change to 'Fix' or
'Variable', as required.
Audio Settings
Audio DRC
Virtual Surround
Channel Level
• Fix – Channel levels are fixed, but you
can set the speaker distances
• Variable – You can specify variable
channel levels as well as speaker
distances
3 If you chose Variable, move the
joystick down to proceed to the next
screen.
Audio Settings
Audio DRC
Virtual Surround
Channel Level
Video Adjust
Disc Navigator
Setup Navigator
1/ 2
Off
Off
Fix
1/ 3
Off
Off
Variable
4 Variable setting only: Set the channel
levels for each speaker.
Audio Settings
Channel Level L
Channel Level C
Channel Level R
Channel Level RS
Channel Level LS
Channel Level SW
• Use the Joystick (up/down) to select a
speaker.
• Use the Joystick (left/right) to adjust the
channel level for that speaker.
Channel levels can be set from –6 dB to
+6 dB. in 0.5 dB increments.
After setting up all the channel levels, move
the Joystick down until you reach the
speaker distance setting screen.
2/ 3
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
06
49
En