Table of Contents
Advertisement
Keyer Controls Button Group
Delegated to the currently selected Keyer
- allow control of Keyer State (on/off), Keyer mode (Lin, Luma, Chroma)
- Matte Fill Select
- Key Priority (Key1-over-Key2 or Key2-over-Key1)
- Self Key & Split modes
- Mask Enable
ON:
When you complete the effect setting, please enter this key to enable your effect.
LIN:
1. Select LIN key on KEYER CONTROLS button group.
2. Select KEYER key on MENUS button group, and then setting CHROMA key value on LCD touch panel.
3. Enter ''ON'' key on KEYER CONTROLS to enable LIN key function.
LUMA:
For more information please see the Key LUMA (Page 6).
CHROMA:
For more information please see the Key CHROMA (Page 6).
MATT:
1. Select MATT key on KEYER CONTROLS button group.
2. Select KEYER key on MENUS button group.
3. Set MATTE Value on LCD menus.
4. Enter ''ON'' key on KEYER CONTROLS to enable LINE key function.
TOP:
If you have two kinds effect, such as LOGO & key CHROMA, you can set LOGO on top when TOP button enable.
SELF:
When you complete the effect setting, this key will setting as foreground.
SPLIT:
When you complete the effect setting, enter this key twice (key light turn yellow), your can key other source for
foreground.
7
Advertisement
Table of Contents
