Healthrider 15.5 S User Manual page 7

4. While another person holds the Console (23)
near the Upright (2), connect the console wire
to the Upper Wire Harness (68).
Tip: Avoid pinching the wires. Attach the
Console (23) to the Upright (2) with the four
Console Screws (59) included with the Console.
Attach the Water Bottle Holder (29) to the
Upright (2) with two M4 x 22mm Screws (63).
5. While another person holds the Upright (2) near
the Frame (1), connect the Upper Wire Harness
(68) to the Lower Wire Harness (73).
Insert the Upper Wire Harness (68) and the
Lower Wire Harness (73) downward into the
Frame (1).
Tip: Avoid pinching the wires. Slide the
Upright (2) onto the Frame (1).
Attach the Upright (2) with two M10 x 74mm
Button Bolts (7), two M10 Split Washers (45),
and two M10 Locknuts (33). Do not tighten the
Button Bolts yet.
4
Console Wire
59
Avoid pinching
the wires
5
2
33
1
7
23
68
29
2
63
Avoid pinching
the wires
45
7
68
73