Healthrider 15.5 S User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin.
Identify the Stabilizer (9) which has round Caps
(21) on the ends.
While another person lifts the front of the Frame
(1), attach the Stabilizer (9) to the Frame with
two M10 x 75mm Carriage Bolts (34) and two
M10 Locknuts (33).
2. While another person lifts the back of the Frame
(1), attach the other Stabilizer (9) to the Frame
with two M10 x 75mm Carriage Bolts (34) and
two M10 Locknuts (33).
3. The Console (23) requires four 1.5V D batteries
(not included); alkaline batteries are recom-
mended. IMPORTANT: If the elliptical
exerciser has been exposed to cold temper-
atures, allow it to warm to room temperature
before inserting batteries into the Console. If
you do not do this, the console displays or
other electronic components may become
damaged. Remove the battery cover from the
Console, and insert four batteries into the
Console. Make sure that the batteries are ori-
ented as shown by the diagrams on the
battery cover. Then, reattach the battery cover.
1
9
34
21
2
33
1
3
Batteries
6
21
1
33
33
9
34
23
Batteries
Battery
Cover