Healthrider 15.5 S User Manual page 11

CONSOLE DIAGRAM
HOW TO USE THE CONSOLE
1. Turn on the console.
Note: The console requires four 1.5V D batteries
(see assembly step 3 on page 6). If there is a
sheet of clear plastic on the face of the console,
remove the plastic.
To turn on the console, press the increase button
or begin pedaling.
2. Change the resistance of the pedals as
desired.
As you pedal,
change the resis-
tance of the
pedals by pressing
the increase or
decrease button.
The selected
resistance level
will be shown in the upper display.
Note: After a button is pressed, it will take a
moment for the pedals to reach the selected resis-
tance level.
3. Follow your progress with the displays.
The lower left
display can show
the elapsed time
and the distance
(total number of
revolutions) that
you have pedaled.
The lower right
display can show
your pedaling
speed (in revolu-
tions per minute)
and the approxi-
mate number of calories you have burned.
When you use the handgrip pulse sensor, the
lower right display will also show your heart rate
(see step 4 on page 12).
11
Increase Button
Decrease Button