Easy Connections - Pioneer DV-566K-s Operating Instructions Manual

02 Connecting up

Easy connections

The setup described here is a basic setup that allows you to play discs using just the cables
supplied with the player. In this setup, stereo audio is played through the speakers in your
TV.
TV
DIGITAL
AUDIO OUT COAXIAL
OPTICAL
• This player is equipped with copy protec-
tion technology. Do not connect this
player to your TV via a VCR using AV
cables, as the picture from this player will
not appear properly on your TV. (This
player may also not be compatible with
some combination TV/VCRs for the same
reason; refer to the manufacturer for
more information.)
• When connecting to your TV as shown
above, do not set the Component Out
setting (page 53) to Progressive.
12
En
A/V IN
Y P AUDIO OUT
B
L
R
P
R
S
VIDEO OUT COMPONENT VIDEO OUT
To power outlet
1 Connect the VIDEO OUT and AUDIO
OUT jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable,
connecting the red and white plugs to the
audio outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
See below if you want to use an S-video,
component or a D video connection.
2 Connect the supplied AC power cable
to the AC IN inlet, then plug into a power
outlet.