Easy Connections - Pioneer DV-565A Operating Instructions Manual

Connecting up
9 DIGITAL AUDIO OUT – OPTICAL
This is a digital audio output for connection to
a PCM, Dolby Digital, DTS and/or MPEG
compatible AV receiver that has an optical
digital input. Connect using a commercially
available optical digital audio cable.
10 CONTROL IN / OUT
For passing remote control signals to other
Pioneer components (page 18).

Easy connections

The setup described here is a basic setup that allows you to play discs using just the cables
supplied with the player. In this setup, stereo audio is played through the speakers in your TV.
IN
AV CONNECTOR 2
• This player is equipped with copy
protection technology. Do not connect
this player to your TV via a VCR using AV
cables, as the picture from this player will
not appear properly on your TV. (This
player may also not be compatible with
some combination TV/VCRs for the same
reason; refer to the manufacturer for
more information.)
TV
DIGITAL
CONTROL AUDIO OUT
OUT
AV CONNECTOR 1(RGB) - TV/AV Receiver
OPTICAL
• You may find it useful to have the manuals
supplied with your other components
handy when connecting this player.
• If you come across any unfamiliar terms
in this section of the manual, turn to the
Glossary on page 78.
A/V IN
AUDIO OUT(2CH)
Y P
B L
CENTER
L
COAXIAL
R
S P R
FRONT SURROND SUB
R
VIDEO OUT
WOOFER
COMPONENT VIDEO OUT
To power outlet
• When connecting to your TV as shown
above, do not set the Component Out
setting (page 56) to Progressive.
1 Connect the VIDEO OUT and AUDIO
OUT (2ch) jacks to a set of A/V inputs on
your TV.
Use the supplied audio/video cable,
connecting the red and white plugs to the
audio outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
AUDIO OUT(5.1CH)
02
13
En