Easy Connections - Pioneer DV-C505 Operating Instructions Manual

(Connecting Up
Easy connections
The setup described here IS a basic setup
that allows you to play discs using just the
cables supplied with the player. In this setup,
stereo audio is played through the speakers
in your TV
A
Important
l
This player is equipped with copy
protection technology. Do not connect
thus player to your TV via a VCR (or your
VCR via thus player) using AV cables, as
the picture from this player WI/I not
appear properly on your TV (This player
may also not be compatible with some
combination TV/VCRs for the same
reason; refer to the manufacturer for
more information.)
1 Connect the VIDEO OUT and AUDIO
OUT IL/R jacks to a set of A/V inputs on
your TV.
Use the supplied red/white stereo audio
cable and the yellow video cable. Make sure
you match up the left and right audio
outputs with their corresponding inputs for
correct stereo sound.
l
The two pairs of analog audio outputs
are exactly the same; use whichever is
convenient.
l
See the following page if you want to
use S-Video or component video cables
for the video connection.
2 Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.